Company News

• Aliases of 304 stainless steel plate tube

  2023 / 04 / 12

  304 stainless steel, which is most often seen in peacetime, is this type. Its standard composition is 18% chromium plus 8% nickel, which is generally called 18-8 stainless steel. The characteristics of this type of stainless steel are non-magnetic, the metallographic structure cannot be changed by the heat treatment method, and the processability is good, and because the alloying element-nickel is included, the corrosion resistance is better than that of only chromium and nickel. Another two types of stainless steel. The main uses of 300-series stainless steel are: general livelihood uses such as kitchen utensils, building materials, medical and health equipment, food processing materials, transportation vehicles, chemical equipment and fittings, mechanical equipment and parts. In the eyes of ordinary people, the so-called stainless steel refers to the 300 series stainless steel, especially 304 stainless steel.

• Stainless steel plate processing

  2023 / 04 / 12

  Because of the special nature of stainless plates, the main processing methods are cold forming and hot forming. The cold processing is often slow and efficient. It is mainly used for the cutting processing of specifications and shapes, and the thermal processing method is very rich. According to different situations, the cutting results are not the same, and the cost is slightly different. Stainless steel cutting cold processing methods include: sawing, wire cutting, water cutting, cutting shears, punching, drilling and other methods, its molding quality is generally high, but low efficiency, often can not meet the needs of mass production! Thermal processing methods Cutting methods include: plasma cutting and laser cutting two methods! These two methods, plasma cutting speed, high efficiency, but the cutting quality is not as good as the laser, but the whole purchase and use costs are much lower than the laser! Both methods can be applied to the special requirements of stainless steel cutting! In summary, plasma cutting is the most widely used stainless steel cutting method in the world today. It is professionally used for cutting stainless steel plates, and the cutting quality is very good. The price is relative to laser and other cutting processing equipment, and it is economical and practical!

• Stainless steel plate

  2023 / 04 / 12

  Stainless steel plates are plates made of stainless steel. The stainless steel sheet is divided into hot and cold rolled products according to the method of manufacture, including sheets 0.5-4 mm in thickness and 4.5-35 mm in thickness. According to the organizational characteristics of steel grades, they are divided into 5 categories: austenitic and austenitic. Body-ferrite, ferrite, martensite, precipitation hardening. Stainless steel plate surface smooth, high plasticity, toughness and mechanical strength, acid, alkaline gas, solution and other media corrosion. It is an alloy steel that does not easily rust, but it is not absolutely rustless. Stainless steel plate will be used in construction and decoration, and many stainless steel products will use it. In short, it can be seen everywhere. So, what is the specification of this stainless steel sheet? Stainless steel sheet specifications are mainly distinguished from thickness and area, and there are differences in the thickness of different specifications of stainless steel sheet. Let's go and see it! Stainless steel plate stainless acid-resistant steel is resistant to weak corrosive media such as air, steam, and water, and corrosive media such as acid, alkali, and salt. In practical applications, I usually apply resistance to weak corrosive media such as air, steam, and water. The steel is called stainless steel. In layman's terms, stainless steel is exposed to the air or immersed in water that is not corroded by oxidizing and rusting steel. Stainless steel is an alloy steel, among which the commonly used alloys are nickel, molybdenum, chromium, titanium, and copper. The corrosion resistance and oxidation resistance of stainless steel are not strong, depending on the type and content of the alloy, and chromium is used to make it. The most basic element with corrosion resistance. S